Author Topic: Programming my Spectrum DX7 for a motor  (Read 1508 times)

0 Members and 1 Guest are viewing this topic.

Offline deathstickTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Programming my Spectrum DX7 for a motor
« on: December 28, 2013, 11:10:13 AM »
I have a Spektrum DX7 and want to program it to achieve the following for a DC motor: Flip a switch and the throttle lever becomes active rotating the motor Clockwise, for example when stick is down it is at 0%, when stick is up it is at 100%. Then flip the same switch to position 2 and the motor direction is reversed to CCW, and the throttle stick functions in the same way down is 0% up is 100%. Let me know if you have any ideas on how to achieve this.


Get Your Ad Here