Hello i need your help

[beh007]

For you infos....

Hello everybody, this is my first post in this forum and i wanted to get feedback on a college project.

My project title is Bluetooth robot.

My question is, is it logic to have a robot been control (bluetooth) using a laptop for basic functions include walking and etc...

I need to prepare a proposal as to know that it will not too expensive for the project which i don't know bluetooth circuits cost.

Please advice.

Thx,
College Student.

[airman00]

Expensive is a relative term

Please tell us your estimated robot ( its functions , size, weight , etc.) AND tell us what your budget range is for this project

,Eric

[beh007]

All right....

I have 2 plan now....

Plan 1 is bluetooth control robot

Method in control....using bluetooth from my laptop to the robot.

Robot estimate height is around 15 cm until 20 cm

I try to make it move by leg/ if is no possible then i go for wheel.

Estimate price is 155 US DOLLAR

-----------------------------------------------------------------------------------------------------------------------------------

I need to get a journal to prove my project is mean something.

Please Advice.

My second plan is to make a wheel robot which using sensor to move by its own.

Example: The robot move accordingly to the track which i saw before.

Please Advice also how to make a proposal to my lecturer.

I'm sorry my bad english, i don't even know where to start, so guys...please advice me.

Thanks,
-Student

[Admin]

Here is a quick list of tutorials that you'd need for your robot (it may look like a lot, so just relax and take lots of notes):

http://www.youtube.com/watch?v=IBpHslpP6DQ
http://www.societyofrobots.com/programming_differentialdrive.shtml
http://www.societyofrobots.com/remote_control_robot.shtml
http://www.societyofrobots.com/microcontroller_tutorial.shtml
http://www.societyofrobots.com/programming_mobot.shtml
http://www.societyofrobots.com/programming_photoresistor.shtml
http://www.societyofrobots.com/electronics_bluetooth_robot.shtml
http://www.societyofrobots.com/microcontroller_uart.shtml

[izua]

A bluetooth module will use about $50. There goes 1/3 of your funding. Ask for more funding or change the communication channel

[pomprocker]

i'm actually able to do this right now.

I'm using a BlueSMiRF Gold BT breakout from sparkfun.com

Hooked up to the UART on my $50 robot. The MCU on that robot is either an ATmega8 or ATmega168.


I can use hyperterminal in Windows to send it commands.